Install the left and right B-pillar trim panel

NOTE: Perform the steps on the left and right side.

Install B-pillar trim panel

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Check clips (1) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Guide upper seat belt (2) into B-pillar trim panel (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert B-pillar trim panel (1) into guides (3) and under the lip of edge protection in the arrow direction.
Clip the B-pillar trim panel in (1) with the clips (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (2).

TIGHTENING TORQUES SPECIFICATION

End lining to body
screw	Tightening torque	42 Nm

Courtesy of BMW OF NORTH AMERICA, INC.