Installing all intermediate levers
NOTE:
TECHNICAL INFORMATION
When replacing one or more intermediate levers:
When removing the intermediate lever, it is imperative to note the part number of the intermediate lever.
A mixed installation of intermediate levers is only permitted in combination with the appropriate torsion spring.
For further information on possible combinations, see the applicable BMW parts catalogue.
When replacing one or more intermediate levers:
When removing the intermediate lever, it is imperative to note the part number of the intermediate lever.
A mixed installation of intermediate levers is only permitted in combination with the appropriate torsion spring.
For further information on possible combinations, see the applicable BMW parts catalogue.
- Version with a torsion spring with an L-shaped contour and a suitable intermediate lever:
Note that the torsion spring (1) ° with °L-shaped contour may only be used in conjunction with the appropriate intermediate lever (2) °.
- Version with a torsion spring with an S-shaped contour and a suitable intermediate lever:
Note that the torsion spring (1) ° with S-shaped contour may only be used in conjunction with the appropriate intermediate lever (2) °.
NOTE: The description is provided only at one component. The procedure is the same for all other components. - Install the intermediate lever (1)
.