Installing the bottom automatic air flap control

Check 

• Check the guides (1) on the bottom air flap control (2) for damage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » The guides are damaged.

  Measure

• Replace the bottom air flap control.
• Connect and lock corresponding connectors.
• Position the bottom air flap control and feed in with the guides (3).
• Tighten down screws (2).
• If applicable, clip in the vehicle wiring harness with the holder (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to IF INSTALLED: INSTALLING THE FRONT RADAR SENSOR (FRS) WITH THE BRACKET .
• Refer to INSTALLING THE FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to INSTALLING FRONT WHEEL ARCH TRIM PANEL ON THE LEFT AND RIGHT (PARTIALLY REMOVED) .
• Refer to INSTALLING THE COVER FOR CENTRAL ENGINE COMPARTMENT .
• Refer to INSTALLING THE FRONT HOOD SEAL .