Install luggage compartment wheel arch trim panel on right

If installed: Connect the connector of the 12V socket 

• Connect the connector (1) of the 12 V socket with the luggage compartment wheel arch trim panel (2) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Install luggage compartment wheel arch trim panel 

• Install the luggage compartment wheel arch trim panel (3).
• Feed in the luggage compartment wheel arch trim panel (3) under the sealing lip of the tailgate seal.
• Secure expanding rivet (2).
• Hand-tighten the nut (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the multifunction hook with the expanding rivet (4).
• Tighten screws (3) of lashing eyes (2).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Lashing point to body
  M8 screw	Tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in covers (1) of lashing eyes (2).

  Installing the emergency release handle for the tailgate (additional work for US version) 

  NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
• Attach the Bowden cable (2).
• Fasten the emergency release handle (1) for the tailgate to the holder.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .