Installing C-pillar trim panel

• Check clamp (1) and clips (2) for damage and correct fit and, if necessary, replace them.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position C-pillar trim panel (1) on guide (4) and guide it in the arrow direction.
• Clip C-pillar trim panel (1) into clamp (2) and clips (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (2).
  TIGHTENING TORQUE SPECIFICATION
  
  

  C-pillar trim panel to body
  Sheet metal screw	Tightening torque	2 Nm

• Clip in the cover (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING REAR TRIM PANEL .
• Refer to INSTALLING THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT .