Install brake guard plate, front (vehicles with high brake)
- Install brake guard plate (2) .
- Replace screws (1).
Parts: Screws
- Insert screws (1) and tighten.TIGHTENING TORQUE SPECIFICATION
Brake guard plate at front swivel bearing M6x12 Replace screw. tightening torque 8 Nm
Follow-up work
- Refer to INSTALLING THE FRONT BRAKE DISC CHAMBER (VEHICLES WITH HIGH BRAKE) .
- Refer to GREASE BRAKE PADS, BRAKE ANCHOR PLATE AND BRAKE CALIPER WITH BRAKE PAD PASTE (VEHICLES WITH HIGH BRAKE) .
- Refer to INSTALLING FRONT PADS (VEHICLES WITH HIGH BRAKE) .
- Refer to ADHESION OF BRAKE PADS TO BRAKE PISTONS .
- Refer to INSTALLING THE FRONT BRAKE PAD WEAR SENSOR .
- Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
- Refer to COMMISSIONING OR BEDDING IN (BRAKE) OF NEW BRAKE PADS AND DISCS (VEHICLES WITH HIGH BRAKE) .