Replacing the driver's seat foam cushion
Preliminary work
- Refer to REMOVING FRONT SEAT .
- Refer to REMOVING OUTER COVER ON FRONT SEAT .
- Refer to REMOVING INNER COVER FROM THE FRONT SEAT .
- Refer to REMOVING THIGH SUPPORT .
- Refer to REMOVING SEAT COVER WITH CUSHION FOR DRIVER'S SEAT .
- Refer to REMOVING THE SEAT COVER FOR THE FRONT SEAT .
NOTE:
TECHNICAL INFORMATION
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Replace the foam cushion.
Parts: Foam cushion
- Version with seat heating:
Position the heating mat (1) on the cushion and align.
Bond the heating mat (1) with adhesive in the areas (2) with the cushion.
Follow-up work
- Refer to INSTALLING THE SEAT COVER FOR THE FRONT SEAT .
- Refer to INSTALLING THE SEAT COVER WITH CUSHION FOR THE DRIVER'S SEAT .
- Refer to INSTALLING THIGH SUPPORT .
- Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
- Refer to INSTALLING OUTER COVER ON FRONT SEAT .
- Refer to INSTALLING FRONT SEAT .