Installing the nearside window

• Remove the adhesive bead with a scraper from the special tool 0 410 436  from the body and from the side window.
  NOTE: TECHNICAL INFORMATION 
  Protect components against corrosion.
  Treat paint damage with corrosion protection.
• Remove the rest of the guide pins (1)  and dual lock tape (2)  . Clean bonding surface.
  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R2

  500 ml

  83190417324

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace Dual Lock tape (2)  .

  Parts:  Dual Lock tape

• Apply Dual-Lock tape (2)  in the area shown on the body.

  Check 

• Check tabs (1)  on the trim strip on the rear side window (2)  for damage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » Tabs (1)  are damaged.

  Measure

• Replace trim strip on the rear side window (2)  .
• Clip the trim strip (1)  at the rear side window (2)  into place.

  Courtesy of BMW OF NORTH AMERICA, INC.

  a	Position of adhesive bead	2 ±1 mm
  b	Width of adhesive bead	8 ±2 mm
  C	Height of adhesive bead	13+2 mm

• Remove remnants of the Dual-Lock tape (1)  .

  Clean bonding surface and stick on new Dual-Lock tape (1)  .

• Clean the bonding surfaces on the side window and the body.
• Apply adhesive bead to the cut back adhesive bead of the side window.
• Apply adhesive bead as shown along the PVC encapsulation (3)  .

  Apply bead joint in area (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Conduct the following operation with the assistance of a second person.
• Align the side window (1) with the special tool 0 492 609 (51 3010) on the side wall and guide in with the  guide pins.
• Press the side window (1)  onto the Dual-Lock tape.
• Fix the side window (1)  with the plastic adhesive tape.

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE SPECIFICATION
  
  

  Yellow plastic adhesive tape

  83199410979

Follow-up work 

• Refer to INSTALLING THE SEAL ON THE FRONT SIDE WINDOW .
• Refer to INSTALLING B-PILLAR TRIM PANEL .
• Refer to INSTALLING C-PILLAR TRIM PANEL .
• Refer to INSTALLING REAR TRIM PANEL .
• Refer to INSTALLING THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT .