LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2023
>>
M240i
>>
Repair and Diagnosis (Single Page)
>>
Body & Frame
>>
Exterior Body Panels
>>
Collision - Body Panel Repair (G42)
>>
41 35 Side Panels
>>
41 35 600 Replace One Holder For Front Side Panel (Side Panel Detached)
>>
Installing The Front Holder
Installing The Front Holder
Position holder
(4)
and tighten the screws
(3)
.
TIGHTENING TORQUE SPECIFICATION
Side panel holder to body
M6 screw
tightening torque
8 Nm
Attach the adjustment plate
(1)
and sheet metal nuts
(2)
on the holder
(4)
.
Courtesy of BMW OF NORTH AMERICA, INC.
Clip the Bowden cable
(1)
and the wiring harness
(2)
into the holder.
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.