Remove The Outer Wheel Arch Section With The Reinforcement

Remove the cavity sealing (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Release welded connections in areas (1) and (2).
Remove the reinforcement of the C-pillar and retaining strap of the C-pillar.

Courtesy of BMW OF NORTH AMERICA, INC.
Mark separating cut (1) according to dimension and make the cut.
Dimension (a) = 20 mm

Courtesy of BMW OF NORTH AMERICA, INC.
Mark separating cut (1) according to dimension and make the cut.
Dimension (a) = 20 mm
Release the welded connections in the areas (2) and (3) and remove the outer wheel arch section.

Courtesy of BMW OF NORTH AMERICA, INC.