Body Gap Dimensions REH-Hin-P-4100-G42 - V.2

General information

The dimensions in this service information are valid at an object temperature of 20°C.

The aim of adjustment is to achieve a uniform gap.

Symmetry of the gaps between left and right sides of the vehicle has top priority.

In terms of door gaps the maximum deviation between the front and rear door gap must be 1.0 mm.

No gap dimension are specified for components which cannot be adjusted.

Gap Dimensions

Fig 1: Hood And Front Bumper Cover Body Gap Dimensions And Measurement Points

G00640797

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Hood And Headlamp Body Gap Dimensions And Measurement Points

G00640798

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Hood And Front Fender Body Gap Dimensions And Measurement Points

G00640799

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 4: Front Fender And Front Pillar Body Gap Dimensions And Measurement Points

G00640800

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 5: Front Roof Panel And Windshield Body Gap Dimensions And Measurement Points

G00640801

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 6: Front Fender And Front Door Body Gap Dimensions And Measurement Points

G00640802

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 7: Front Door And Side Sill Trim Panel Body Gap Dimensions And Measurement Points (1 Of 2)

G00640803

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 8: Front Door And Side Sill Trim Panel Body Gap Dimensions And Measurement Points (2 Of 2)

G00640804

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 9: Front Door And Quarter Panel Body Gap Dimensions And Measurement Points

G00640805

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 10: Roof And Back Glass Body Gap Dimensions And Measurement Points

G00640806

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 11: Quarter Panel And Trunk Lid Body Gap Dimensions And Measurement Points (1 Of 2)

G00640807

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 12: Quarter Panel And Trunk Lid Body Gap Dimensions And Measurement Points (2 Of 2)

G00640808

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 13: Trunk Lid And Rear Bumper Cover Body Gap Dimensions And Measurement Points

G00640809

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 14: Front Roof And Front Moonroof Body Gap Dimensions And Measurement Points

G00640810

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 15: Rear Roof And Rear Moonroof Body Gap Dimensions And Measurement Points

G00640811

Courtesy of BMW OF NORTH AMERICA, INC.