Removing the rear emblem
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Mask the working area with plastic adhesive tape to avoid paint damage.
- Carefully heat the emblem (1) with a hot air blower (temperature about 40-55°C).
- Release the emblem (1) with the special tool 0 496 571 (00 9 327)
from the adhesive strips (2) and lever
out from the guide pins (3).