Replacing the cushion for the rear seat backrest
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING THE RIGHT REAR SEAT BACKREST .
- Refer to REMOVING THE HEAD RESTRAINT .
- Refer to REMOVING THE GUIDE SLEEVE FOR THE REAR HEAD RESTRAINT .
- Refer to INSTALLING THE REAR PANEL ON THE REAR SEAT BACKREST .
- Refer to REMOVING THE BACKREST FRAME FOR THE RIGHT REAR SEAT BACKREST .
- Refer to REMOVING THE BACKREST COVER FROM THE REAR SEAT BACKREST .
NOTE:
TECHNICAL INFORMATION
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Replace the cushion (2).
Parts: Upholstery
- Version with the rear seat heating:
Position heating mat (1) on cushion (2) and align it.
Form an adhesive bond between heating mat (1) and cushion (2).
Follow-up work
- Refer to INSTALLING THE BACKREST COVER OF THE REAR SEAT BACKREST .
- Refer to INSTALLING THE BACKREST FRAME FOR THE RIGHT REAR SEAT BACKREST .
- Refer to REMOVING THE REAR PANEL FROM THE REAR SEAT BACKREST .
- Refer to INSTALLING THE GUIDE SLEEVE FOR THE REAR HEAD RESTRAINT .
- Refer to INSTALLING THE HEAD RESTRAINT .
- Refer to INSTALLING THE REAR SEAT BACKREST .
- Refer to INSTALLING THE REAR SEAT .