Installing the power window switch on the driver's side

• Position the power window switch (3) on the door trim panel (4) and snap it in the detent (arrow).
• Tighten the screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Power window switch on door trim panel
  Screw	Tightening torque	1.6 Nm

• Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SOUND INSULATION ON FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE FRONT DOOR TRIM PANEL .