Removing and installing/replacing trim for Head-Up Display (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 325
When working on trim panel components, make When working on trim panel components, make damaged (e.g. by sharp-edged tools).
Release cover for head-up display (1) with special tool 00 9 325 at marked area from retaining clips.
Feed cover for head-up display (1) in direction of arrow out of instrument panel trim and remove.
Installation note:
Retaining clips (1) must not be missing or damaged.
Make sure cover for head-up display (2) is correctly seated on instrument panel trim.