Removing and installing/replacing base plate (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 327
Necessary preliminary tasks:
- Remove rear center console COVER
Unlock and disconnect associated plug connections in area (A).
Unclip line (1) at center console (2).
Reach under the base plate and unclip associated line (1) on center console.
Installation note:
Make sure plug connections are correctly seated.
Ensure correct cable routing.
Mount special tool 00 9 327 as illustrated.
Reach from rear under base plate (1).
Carefully leverage out base plate (1) along marked line (A) and simultaneously press lightly from below to disengage latch mechanisms.
Remove base plate (1) and feed out line.
NOTE:
Center console is shown removed for purposes of clarity.
Installation note:
Make sure line (1) is properly routed.
Catches (2) must not be damaged or missing.
Make sure base plate is correctly engaged on center console.