Removing the sound insulation from the front door
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Remove front left or right door HANDLE COVER
- Remove the front left or right front door trim panel SWITCH TRIM
- Remove left or right front DOOR TRIM PANEL
NOTE:
TECHNICAL INFORMATION
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see: 51 48... NOTES on bonding the sound insulation (Sl) in doors
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see: 51 48... NOTES on bonding the sound insulation (Sl) in doors
- Use a suitable, sharp cutting tool (3) to cut through the sealing bead (1) of the sound insulation (2) in the corresponding area to be loosened.
- Make sure when cutting through the sealing bead (1) not to damage the sound insulation (2) and the cables.
- Observe the position of the sealing bead (1).
- Remove the sound insulation (2) from the cable (3) and put to one side.