Installing underbody protection at rear

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Courtesy of BMW OF NORTH AMERICA, INC.

Position the rear underbody protection (2).
Tighten the bolts along the line (1).

TIGHTENING TORQUE SPECIFICATIONS

Underbody panelling on body
Screw not metric thread	3 Nm
Screw M6	8.8 Nm
Nut	2.5 Nm