Adjusting rear window (330i xDrive Wagon, 328d xDrive Wagon)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR SPOILER .
Prerequisite:
- BODY DIMENSIONS must be correctly adjusted
IMPORTANT:
Rear window hinge is under preload!
Slacken but do not release nuts (1) for rear window bracket (2).
Slacken but do not release nuts (1) for rear window bracket (2).
Adjust rear window (1) according to BODY DIMENSIONS and fix in position with nuts (2).
Tightening torque 51 31 1AZ .
Bottom underprotrusion settings:
Determine underprotrusion (x) between body edge and rear window.
Release lock nut (1) of lock bracket (2).
Adjust underprotrusion (x) by turning lock bracket (2).
Installation note:
Always lock the lock bracket (2) in correct position for locking rear window.