Removing and installing (replacing) decorative trim at center console (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 327
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Version with instrument panel in leather:
When removing and installing, the decorative strip (1) may damage the leather of the instrument panel.
To avoid damage, the yellow plastic adhesive tape (2) must be placed between the decorative strip (1) and the instrument panel.
Loosen cover (1) with special tool 00 9 327 from clamps (2).
If necessary, unlock associated plug connections and disconnect.
Remove cover (1) upwards.
Installation note:
Replace faulty clamps (1).
Replacement (depending on version):
Remount CONTROLLER (2).