Install rear side window glass
- Guide the side window glass (3) from above into the door.
- Insert the side window glass (3) on to the top of the door.
- Tighten down screw (2) .
TIGHTENING TORQUE SPECIFICATION
| Side rear window pane to door | ||
|---|---|---|
| Sheet metal screw 4.2X19 |
Tightening torque | 2.5 Nm |
| Oval-head screw | Tightening torque | 7.6 Nm |
- Mount the rubber window guide (1) in the area of the side window glass (3) on the door frame.
- Tighten down screws (3) .
TIGHTENING TORQUE SPECIFICATION
| Side rear window pane to door | ||
|---|---|---|
| Sheet metal screw 4.2X19 |
Tightening torque | 2.5 Nm |
| Oval-head screw | Tightening torque | 7.6 Nm |
- Mount the cover (2) .
- Apply the decal (1) .
Follow-up work