Installing the trim on the rear bumper cover
Check
- Check detents (arrows) for damage.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Result
» The detents are damaged.
Measure
- Replace the trim on the rear bumper cover.
- Position trim (2)
on the rear bumper cover (1)
and insert it into guides (3)
on the left and right.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Clip trim (2)
into all detents (3)
of the rear bumper cover (1)
.
 Courtesy of BMW OF NORTH AMERICA, INC.
|