Remove rear door trim
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Pull the door opener (1).
- Release the detents (3) of the trim (2) with a suitable tool.
- Remove the trim (2).
- Loosen screws (1).
- Unclip the door trim panel (1) with the special tool 0 496 569 (00 9 325) on the clips (2) .
- Thread the door trim panel (1) out of the window channel strip toward the top.
- Release the detent (1) and feed out the Bowden cable for the inner door opener (2).
The Bowden cable for the inner door opener (2) will feed itself out of the door opener.
- Unlock available plug connections and disconnect.
- Remove door trim panel.