Remove support for bumper cover at front bottom
Preliminary work
- Refer to REMOVING SEAL FOR FRONT HOOD .
- Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
- Refer to REMOVE CENTER RADIATOR ORNAMENTAL GRILLE .
- Refer to PARTIALLY RELEASING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
- Refer to PARTIALLY REMOVING TEMPERATURE SENSOR .
- Refer to REMOVE FRONT BUMPER COVER .
- Refer to IF INSTALLED: REMOVING FRONT RADAR SENSOR (FRS) WITH BRACKET .
- Refer to REMOVING THE BOTTOM AUTOMATIC AIR FLAP CONTROL .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Loosen screws (1) .
- Guide out the support for the bumper cover at front bottom (2) and remove it.