Removing the eccentric shaft (cylinder head removed)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 BMW M340i xDrive, 2024 BMW M340i, 2023 BMW M340i xDrive, 2023 BMW M340i, and 2022 BMW M340i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
- Remove all screws (marks).
- Guide out and remove bearing brackets (1) to (6) (arrows).
- Set down bearing brackets (1) to (6) neatly in special tool 0 495 105 (11 4 480) .
- Feed out and remove bearing cap (A) .
- Place bearing cap (A) neatly in special tool 0 495 105 (11 4 480) .
- Feed the air eccentric shaft (1)
out toward the top and remove.