Install vibration absorber on the rear axle differential
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following step(s) must be performed if the listed component(s) is/are installed.
Install vibration absorber on the rear axle differential
- Position the vibration absorber (1).
- Replace the screw (2).
Parts: Screw
- Position and tighten the screw (2).TIGHTENING TORQUE SPECIFICATION
Vibration absorber at rear axle M8 Replace screw Tightening torque 28 Nm TIGHTENING TORQUE SPECIFICATIONVibration absorber at rear axle M10 Replace screw.
Joining torque 56 Nm Angle of rotation 90°