Tightening the screw connection of the wishbone on the front subframe

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Tighten the screw connection in the NORMAL POSITION .

Slacken the screw (1) with the standard tool (2) by a turn and tighten it. In doing so, counter support at the nut (3).

TIGHTENING TORQUE SPECIFICATION

Wishbone to front axle support
M12 Replace screw and nut. Tighten in normal position! Tightening via screw.	Tightening torque 68 Nm
	Angle of rotation 180°

Courtesy of BMW OF NORTH AMERICA, INC.