Shifting vehicle into design position
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Lay weights in the area of the spring strut until the vehicle ride height is within the tolerance!TECHNICAL DATA DESCRIPTION
Tolerance for ride height at design level Tolerance for setpoint value max. 2 mm Difference between left and right max. 2 mm - Measuring vehicle ride height (A): (1) Attach the tape measure to the bottom rim flange (2) and measure the distance to the lower wheel arch edge.