Install all ignition coils
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The description is provided only at one component. The procedure is the same for all other components.
Install ignition coil
- Install ignition coil (3).
- Tighten down screw (2).TIGHTENING TORQUE SPECIFICATION
Ignition coil Screw Tightening torque 8 Nm - Connect connectors (1) and lock.
The connector (1) must engage audibly.
- Mount the connector (1) of the Lambda oxygen sensor and the oxygen sensor monitor on the cable duct (2).