If installed: Partially release the engine oil cooler

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Hot surfaces .
Risk of burning!

Perform all work only on components that have cooled down.

NOTE: TECHNICAL INFORMATION
The work must be performed with vehicle care to prevent component damage.

Loosen screws (1).
Drill out the left rivet (2).
Remove the left damper (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock lock (1).
Feed out the engine oil cooler (2) from the bracket (3) in the arrow direction and place to one side.

Courtesy of BMW OF NORTH AMERICA, INC.
Fix the engine oil cooler (1) with a cable tie (2) as shown.

Courtesy of BMW OF NORTH AMERICA, INC.