Installing the tailgate lock
- Tighten down screws (2) .
TIGHTENING TORQUE SPECIFICATION
| Tailgate lock to body | ||
|---|---|---|
| Hexagon screw M8x20 |
Tightening torque | 19 Nm |
- Connect plug (1) .
- Version with Automatic Soft Close system:
Attach the Bowden cable (3) .
Connect plug (4) .
- Version with emergency release:
Attach the Bowden cable (5) .
Follow-up work
- Refer to ADJUST THE LOWER PART OF THE TAILGATE LOCK LOWER SECTION .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to IF INSTALLED: INSTALLING THE EMERGENCY WHEEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .