Remove front cross connection
Preliminary work
- Refer to REMOVING SEAL FOR FRONT HOOD .
- Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
- Refer to REMOVING CENTER RADIATOR ORNAMENTAL GRILLE .
- Refer to PARTIALLY RELEASING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
- Refer to PARTIALLY REMOVING TEMPERATURE SENSOR .
- Refer to REMOVING FRONT BUMPER COVER .
- Refer to REMOVE TOP AUTOMATIC AIR FLAP CONTROL .
- Refer to REMOVING UPPER CROSS CONNECTION .
- Loosen the expanding rivet (1) .
- Loosen screws (2)
.
- Loosen screws (1) .
- Guide out the front cross connection (2) upwards and remove.