Removing the center cowl upper part

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.

NOTE: The following step(s) must be performed if the specified component(s) is/are installed.

Loosen screws (1) and (2).
Remove tension strut (3) at the shock tower upwards.

Courtesy of BMW OF NORTH AMERICA, INC.
Version with mild hybrid technology
Unclip wire (1) from the holders (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the bolts In the marked areas.
Remove the center cowl upper part (1).

Courtesy of BMW OF NORTH AMERICA, INC.