Install front axle differential

Replace O-ring (1).
Parts: O-ring
Coat the O-ring (1) with front axle differential oil.

Courtesy of BMW OF NORTH AMERICA, INC.
Position front axle differential (3).
Make sure marked screws are installed in correct installation locations:
- Bolts (1) M12x55
- Bolt (2) M12x105
Tighten down screws (1) and (2).

TIGHTENING TORQUE SPECIFICATION

Front axle final drive to motor oil pan
M12	tightening torque	140 Nm

Courtesy of BMW OF NORTH AMERICA, INC.