If installed: Removing front radar sensor (FRS) with bracket

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

• Release the cover (1) from the detents (2) and remove towards the front.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1) and disconnect.
• Unclip the vehicle wiring harness with the bracket (2) and place aside.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark the position of the holder (2) for the front radar sensor (FRS).
• Loosen screws (1).
• Feed out the front radar sensor (FRS) with the bracket (2) from the lugs (3) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.