Removing the wiring harness for the right convertible top compartment lid mechanism
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING THE CONVERTIBLE TOP COMPARTMENT LID .
- Loosen the expanding rivet (1).
- Remove Hall effect sensors (2).
- Unlock plug connection (3) and disconnect.
- Unclip and remove the wiring harness for the convertible top compartment lid mechanism (4) from the existing holders.
NOTE:
If necessary, shift the convertible top compartment lid mechanism manually to improve accessibility to the Hall effect sensors.