Installing the Bowden cable for the emergency unlocking
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For a better overview the removed condition is shown here.
- Fasten the Bowden cable to the convertible top compartment lid mechanism (1) using a blind rivet (2).
- Thread in the Bowden cable (2) at the holders (3).
- Thread the Bowden cable (1) in arrow direction through the opening (2) at the convertible top compartment lid mechanism.
- Thread in the Bowden cable (1) at the holders (2).
- Attach the Bowden cable (1) with adhesive tape in the areas (3).
- Thread the Bowden cable (1) through the loop in the area (4).
Follow-up work
- Refer to INSTALLING THE CONVERTIBLE TOP COMPARTMENT LID .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to INSTALLING THE TOP LUGGAGE COMPARTMENT TRIM PANEL .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .