Install the side trim panel in the footwell at the left A-pillar
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Check the clips (3) for damage and replace if necessary.
- Position the side trim panel (2) and engage it in the clips (3).
- Make sure that the side trim panel (2) is correctly fitted against edge protection.
- Tighten down screw (1).TIGHTENING TORQUE SPECIFICATIONS
A-pillar footwell side trim panel screw Tightening torque 2.5 Nm - Install hood release lever (1).
- Pull the hood release lever (1) to the rear.
- Install locking wedge (2).
Follow-up work
- Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
- Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .