Install the rubber window seal

• Coat the rubber window seal (1) with lubricant approved for use.
  CONSUMABLE SPECIFICATION
  
  

  Installation aid  (Circo Light; lubricant)

  250 ml, Bottle

  83192405829

• Correctly position the rubber window seal (1) on the door and install.
• Correctly install the rubber window seal (1) in the window guide rail (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the rubber window seal (2) correctly.
• Fasten the rubber window seal (2) to the clip (3).
• Mount the clip (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed the in rubber window seal (2) correctly.
• Fasten the rubber window seal (2) to the clips (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING THE MODULE BRACKET ON THE FRONT DOOR .
• Refer to INSTALLING THE WINDOW CHANNEL STRIP (FRONT) ON THE DOOR .
• Refer to FITTING VEHICLE EXTERIOR MIRROR .
• Refer to INSTALLING THE MIRROR TRIANGLE .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to ADJUSTING DOOR WINDOW GLASS .
• Refer to INSTALLING OUTER WINDOW CHANNEL STRIP .