Install the stiffening plate
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the thrust field (3) on the covers of the steering assembly (2) and position.
- Replace the bolts (arrows).
Parts: Screws
- Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONS
| Thrust field to front axle support | ||
| M8 Replace screws. | Joining torque Angle of rotation |
25 Nm 70° |
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Underbody protection | ||
| screw | Tightening torque | 3 Nm |
Follow-up work
- Refer to INSTALLING FRONT UNDERBODY PROTECTION .