Removing the right ventilation grille
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
Preliminary work
- Loosen screw (1) .
- Remove the ventilation grille (2) from the clamps 0 496 569 (00 9 325) at the marked points using the special tool (3) .
- Pull out the ventilation grille (2)
slightly.
- Unlock plug connection (1) and disconnect.
- Remove the ventilation grille (2) .