(Removing the reinforcement for the bumper cover (M Aerodynamics package))

Release the wiring harness (1) from the reinforcement and disconnect all the existing plug connections.

Courtesy of BMW OF NORTH AMERICA, INC.
Remove blind rivets (1).
Release the screw (2).
Release reinforcement (3) from the detents (arrows).
Release and remove reinforcement (3) from adhesive strip (4).
Remove any adhesive residue from the bumper cover.
(CONSUMABLE SPECIFICATIONS)

Adhesive remover 1l, Can 83110009712

Courtesy of BMW OF NORTH AMERICA, INC.