(Removing the left and right A-pillar trim panel)

NOTE: Description is for left component only. Procedure on the right side is identical.

WARNING: Pyrotechnic components. 
Danger! Immobilization period-threatening injuries! 

• All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
• Replace any damaged part or ones that have been dropped.
• For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

WARNING: Airbag unit. 
Danger! Immobilization period-threatening injuries! 

• Before working on the airbag, disconnect the negative battery cable from the battery.
• Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
• For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

• Unclip cover (1) and release the underlying screw.
• Detach A-pillar trim panel (2) from the clips (3) and remove upward.

Courtesy of BMW OF NORTH AMERICA, INC.