Remove rear door trim
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE TRIM FOR THE EMERGENCY OPERATION .
- Refer to REMOVING THE DECORATIVE STRIP FROM THE REAR DOOR TRIM PANEL .
- Loosen screws (1)
.
- Unclip door trim panel (2) from clips (1) using special tool 0 496 569 (00 9 325) .
- Unclip door trim panel (2)
inwards from the clamps of the window recess finisher strip.
- Release detent (1)
and guide out Bowden cable (2)
.
Bowden cable (2) guides itself out of the door handle in the process.
- Unlock available plug connections and disconnect.
- Remove door trim panel.