5164 Front Panel, Front End
5164 TIGHTENING TORQUE OVERVIEW
| Cross connection, upper section | ||
| Screw Replace screws |
Tightening torque | 28 Nm |
| Cross connection at the front of the lock | ||
| Oval-head screw Replace screws |
Tightening torque | 28 Nm |
| Lock support on bumper bracket | ||
| M8x20 screw Replace screws |
Tightening torque | 28 Nm |
| Lower air flap control on support | ||
| Oval-head screw Replace screws |
Tightening torque | 4 Nm |
| Rear cross connection on body | ||
| M10x45 hexagon bolt Replace screws |
Tightening torque | 56 Nm |
| Rear cross connection on lock support | ||
| Hexagon screw M8x20 Replace screws |
Tightening torque | 19 Nm |
| Reinforcement strut on upper front connection/bumper bracket | ||
| M8x20 screw Replace screws |
Tightening torque | 28 Nm |