5111 Bumper, Front
5111 TIGHTENING TORQUE OVERVIEW
| Bumper cover | ||
| Screw for thermoplastics | Tightening torque | 2.3 Nm |
| Bumper cover on side wall | ||
| Screw | Tightening torque | 3 Nm |
| Deformation element on front subframe | ||
| Hexagon bolt with flange M8 Replace screw |
Tightening torque | 19 Nm |
| Front bumper bracket to engine mount | ||
| Hexagon screw with flange Replace screw |
Tightening torque | 100 Nm |
| Angle of rotation | 180° | |
| License plate baseplate | ||
| Oval-head screw | Tightening torque | 0.7 Nm |
| Mount on bumper bracket | ||
| Hexagon screw M6x20 | Tightening torque | 8 Nm |
| Side bumper guide on center bumper guide | ||
| Hexagon bolt for thermoplastic | Tightening torque | 2.3 Nm |