Removing the gap seal at the B-pillar
NOTE:
TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .
Precondition
Front door is open.
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Release gap seal (1) from clip (2) .
- Detach and remove gap seal (1) from the adhesive strip over the entire length.
- Remove the adhesive residue from the door.
CONSUMABLE SPECIFICATION
| Adhesive remover | 1 l, Can | 83110009712 |