Remove the B-pillar trim panel upwards
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Adjust the front seat completely to the front and top.
- Loosen screw (1) .
- Feed out the front seat belt end fitting (2)
in the marked area from the seat frame (3)
.
- Guide out the seat belt end fitting with belt (1) carefully from cover (2) in the marked area.
- Release the B-pillar trim panel (1) at the clips (2) and guide it downward out of the guides (3) .
- Remove the B-pillar trim panel (1) and thread out the safety belt at the same time.