Removing the bumper strip from the rear door

NOTE: RISK OF DAMAGE 
Careless handling of tools and sharp-edged components. 
Scratches, surface damage. 

• Protect working area.
• Handle tools and components carefully.

NOTE: Description is for left component only. Procedure on the right side is identical.

• Release bumper strip (1)  from the adhesive strip in the area of the dotted line.
• Lever out bumper strip (1)  outwards from clips (2)  using special tool 0 496 569 (00 9 325) .
• Remove bumper strip (1)  .
• Remove the adhesive residue from the door.

CONSUMABLE SPECIFICATION

Adhesive remover

1 l, Can

83110009712

Courtesy of BMW OF NORTH AMERICA, INC.