Removing the coolant line between the coolant pump and heat exchanger

Detach the heater return 

• Loosen screw (1).
• Remove the heater return (2) from the coolant pump to the side.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the wiring harness mounting (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Remove left throttle valve assembly 

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the throttle body (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1) and disconnect.
• Remove the sealing ring (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock the coolant line on the retaining clip (1) and disconnect it.
• Guide out the coolant line.

  Courtesy of BMW OF NORTH AMERICA, INC.